Direct additive manufacturing of melt growth Al2O3-ZrO2 functionally graded ceramics by laser directed energy deposition

Functionally graded ceramics (FGC), which combine properties of different ceramics in one part, usually have better comprehensive function and structural efficiency. In this study, four different gradient transition Al₂O₃-ZrO₂ FGC samples were prepared by laser directed energy deposition (LDED) method. The results show that there is an obvious interface in direct transition sample. The transition section bears tensile stress caused by difference of thermophysical properties of materials, resulting in significant longitudinal cracks. Element transition in interface region shows a step sharp transition. The direct transition sample shows intergranular fracture and the bonding strength is very low. Gradient transition mode can effectively suppress cracks, and avoid the step transition of microstructure and elements. Elements, microhardness of 25, 20 wt% FGC samples realized a nearly linear smooth transition. The interface fracture of FGC samples changed to transgranular fracture, bonding strength was significantly improved, and the maximum flexural strength reached 160.19 MPa.     

Highly efficient electrochemical generation of H2O2 on N/O co-modified defective carbon

The electrochemical oxygen reduction reaction (ORR) via two-electron pathway is a sustainable way of producing hydrogen peroxide. Nanostructured carbon materials are proved to be effective catalysts for 2e^? ORR. Herein, a series of mesoporous carbon with tunable nitrogen species and oxygen functional groups were synthesized by varying the added amount of dopamine hydrochloride as nitrogen and oxygen source. The modified catalysts exhibited higher content of pyrrolic-N and ether C–O groups which are confirmed by a series of characterization. Raman spectra and correlation analysis revealed that the increased proportion of defect sites in carbon materials are closely related to the introduced pyrrolic-N and ether C–O groups. And the rotating ring-disk electrode (RRDE) measurement carried out in 0.1 M KOH electrolyte showed the H₂O₂ selectivity increased with the content of defect sites. Among them, the optimized catalyst (NOC-6M) exhibited a selectivity of 95.2% and a potential of 0.71 V vs. RHE at ?1 mA cm^?2. Moreover, NOC-6M possessed the high H₂O₂ production rate of 548.8 mmol g_cat^?1 h^?1 with faradaic efficiency of 92.4% in a two-chamber H-cell. Further mechanistic analysis revealed that the introduction of pyrrolic-N and ether C–O are likely to improve the binding energy of the defect sites toward 1OOH intermediate, resulting in a more favorable 2e^? ORR pathway for H₂O₂ production.     

Excellent supercapacitive performance of graphene quantum dots derived from a bio-waste marigold flower (Tagetes erecta)

Marigold flower (MG; Tagetes erecta) derived Graphene quantum dots (GQDs) have been successfully reported for the fabrication of supercapacitor electrodes in charge storage devices. The GQDs have been synthesized through a hydrothermal route using biomass viz. Waste material (MG) without adding any hazardous chemicals. The successful formation of GQDs as elaborated has been confirmed by various analytical characterization techniques. The as-synthesized GQDs have been electrodeposited on the Ni foil (working electrode) with the help of PVDF (binder) and subsequently, cyclic voltammetry (CV) has been conducted to access specific capacitance, energy density, and other parameters. Moreover, the galvanometric charge/discharge (GCD) technique has been employed due to its accuracy and reliability. Maximum areal specific capacitance has been found as 1.6008 F/cm² with the current density of 2.0 A/g even after loading a little amount of material on the electrode. The high magnitude of columbic efficiency (160.08), energy density (17.78 Wh/kg), and specific capacitance of 200 F/g at current density 2.0 A/g within a voltage range of −0.55 V to +0.25 V in 2 M KOH electrolyte solution indicate a good electrocapacitive performance of the as-synthesized material. Moreover, the as-synthesized GQDs have shown excellent capacitive retention after 1000th cycles which clearly embarks its sustainable electrocapacitive nature and henceforth offers outstanding potential for the applications in energy storage devices like supercapacitors.     

Life-cycle assessment of hydrogen technologies with the focus on EU critical raw materials and end-of-life strategies

We present the results of a life-cycle assessment (LCA) for the manufacturing and end-of-life (EoL) phases of the following fuel-cell and hydrogen (FCH) technologies: alkaline water electrolyser (AWE), polymer-electrolyte-membrane water electrolyser (PEMWE), high-temperature (HT) and low-temperature (LT) polymer-electrolyte-membrane fuel cells (PEMFCs), together with the balance-of-plant components. New life-cycle inventories (LCIs), i.e., material inputs for the AWE, PEMWE and HT PEMFC are developed, whereas the existing LCI for the LT PEMFC is adopted from a previous EU-funded project. The LCA models for all four FCH technologies are created by modelling the manufacturing phase, followed by defining the EoL strategies and processes used and finally by assessing the effects of the EoL approach using environmental indicators. The effects are analysed with a stepwise approach, where the CML2001 assessment method is used to evaluate the environmental impacts. The results show that the environmental impacts of the manufacturing phase can be substantially reduced by using the proposed EoL strategies (i.e., recycled materials being used in the manufacturing phase and replacing some of the virgin materials). To point out the importance of critical materials (in this case, the platinum-group metals or PGMs) and their recycling strategies, further analyses were made. By comparing the EoL phase with and without the recycling of PGMs, an increase in the environmental impacts is observed, which is much greater in the case of both fuel-cell systems, because they contain a larger quantity of PGMs.     

Design and computational analysis of a metal hydride hydrogen storage system with hexagonal honeycomb based heat transfer enhancements-part A

In this study, design and performance analysis is carried out for a 10 kWh metal hydride based hydrogen storage system. The system is equipped with distinctive aluminium hexagonal honeycomb based heat transfer enhancements (HTE) having higher surface area to volume ratio for effective heat transfer combined with low system weight addition. The system performance was studied under different operating conditions. The optimum absorption condition was achieved at 35 bar with water at room temperature as heat transfer fluid where up to 90% absorption was completed in 7200 s. The performance of the reactor was observed to significantly improve upon the addition of the HTE network at a minimal system weight penalty.     

地表水中石油类监测存在的问题与对策

为使我国地表水中石油类检测过程更具可操作性和推广性,使各实验室石油类检测结果更具可对比性和量值溯源性,本文从地表水中石油类样品采集、样品检测及标准物质选取等三个方面对当前国内外相关标准中规定内容进行了汇总梳理,得出目前采用的样品采集方法均难以保证样品代表性、各种检测方法关注点不同且各有利弊、标准物质的选取对最终测定结果有较大影响的结论。为解决上述难题,建议开展以下3方面工作:(1)研发一种符合地表水中石油类赋存状况的水样采集器;(2)将地表水环境质量标准中"石油类"指标分为"低沸点挥发性石油类"和"高沸点半挥发性石油类"指标分别检测;(3)分流域或河流开展石油类标准物质研制工作。     

Structure development and dielectric properties of Zn-doped Pb([Mg,Fe],W)O3 perovskite ceramics

Ceramic samples of a pseudo-binary system Pb(Mg_1/2W_1/2)O₃-Pb(Fe_2/3W_1/3)O₃ (PMW-PFW) were prepared by solid-state reaction. In addition, their compositions were modified by 20 mol% Pb(Zn_1/2W_1/2)O₃ (PZW) doping in order to investigate the role of zinc in the perovskite formation and dielectric properties. The perovskite contents were ≥95.1% at the overall composition range, except for a significantly low value of 79.0% at 0.8PFW-0.2PZW. The extension of sintering time for PMW accelerated superstructure formation, resulting in the ordering factor increased up to 0.40 after 12 hours heat treatment. The maximum dielectric constant values increased with increasing PFW fractions. In comparison, the phase transition temperatures decreased sharply (by up to 161°C) at low concentrations of PFW, followed by mild changes (by up to 47°C) afterward. The dielectric constant spectra were analyzed in terms of diffuseness characteristics, which reflected the phase transition modes quite well.     

Soft Matter Technology at KIT: Chemical Perspective from Nanoarchitectures to Microstructures

Bioinspiration has emerged as an important design principle in the rapidly growing field of materials science and especially its subarea, soft matter science. For example, biological cells form hierarchically organized tissues that not only are optimized and designed for durability, but also have to adapt to their external environment, undergo self‐repair, and perform many highly complex functions. Being able to create artificial soft materials that mimic those highly complex functions will enable future materials applications. Herein, soft matter technologies that are used to realize bioinspired material structures are described, and potential pathways to integrate these into a comprehensive soft matter research environment are addressed. Solutions become available because soft matter technologies are benefitting from the synergies between organic synthesis, polymer chemistry, and materials science.     

Engineering the Structure of Mesoporous Bioactive Glass Microspheres by the Surface Effect of Inverse Opal Templates and Temperature

The interactions of ions and molecules with material surface are highly dependent on the surface properties of the material. Therefore, the distribution of ions or molecules near the material surface may be affected by the surface properties. This phenomenon can be significant enough for controlling the structure of a material synthesized in the sub‐micrometer scale confinement space of a template. This work confirms that inverse opals are perfect templates for offering confinement space, while their different surface properties can strongly affect ion and block copolymer distribution in the confinement space. This surface effect principle can be used for the controlled synthesis of colloids with complex composition. As an example, four kinds of mesoporous magnetic bioactive glass colloids with ordered mesopores, core–shell structure, open surface pores, or disordered mesopores are prepared by using polystyrene and carbon inverse opal templates. This work reveals that inverse opal templates possess great advantage in controlled synthesizing colloidal structures due to their surface effect on ions and molecules and confinement space.